Toyota RAV4 OEM Third Brake Light | 2013-2018

Description

This is the OEM factory third brake light designed to fit the fourth generation Toyota RAV4.  This includes models from 2013 through 2018.  There is some crossover between models, so it is critical to measure the length of your light and observe the photos in our gallery to ensure you are ordering the correct replacement.  Your 3rd brake light should measure 11 inches long and have no visible screws holding it in from the outside of the vehicle.  This light is mounted from the inside of the spoiler with two reverse threaded screws.   You must access the screws to remove the light from within your vehicle.  If your light has screw holes visible from the outside of the vehicle, this is not your light.  We recommend you view other related products below for alternative Toyota RAV4 third brake lights.  We carry several different models.

This third brake light measures approximately 11″ inches long and is mounted with two reverse threaded screw holes on either end of the lens. This light uses a female factory plug connector and has no wiring.  This clear or smoked color third brake light is illuminated by 9 high-powered LED lights and is both DOT/SAE approved for US vehicles, and E-Mark approved for European vehicles.  This third brake light is often found on a variety of Toyota and Lexus model vehicles.

If you are not sure if this is light is the appropriate replacement for your car or truck please follow our online instructions.

Specifications:

• 11″ Approximate Length
• 1.5″ Depth (From the Front of the Lens to the Back of the Lens)
• 1″ Height (From the bottom of the lens to the Top of the Lens)
• Clear Lens (Lights up Red)
• 2  Reverse Threaded Screw Holes
• 9 High-Powered LEDs
• 3-Year Limited Warranty
• ISO-9001 Certified Quality Manufacturing
• SAE/DOT Approved (Department of Transportation)
• E-Mark Approved