14.27″ 3 Screw Snugtop Third Brake Light

Description

This LED 3rd Brake Light is commonly found on a variety of Snugtop Camper Shells & Toppers.   It measures approximately 14.27 inches in length.  This third brake light mounts from within the Snugtop Topper or Camper with three screws and a plastic bracket (Included).  You should not see any screws from the face or front of your light.  The screws for this light are reverse threaded and secured within the camper shell or topper.

This light is uniquely mounted from the inside of the vehicle which should help you determine if this is your replacement.  If you are not sure if this is light is the appropriate replacement for your vehicle please follow our online instructions or send us a photo of your third brake light.  We should be able to identify your third brake light from a photo.  Shipping and handling fees are non-refundable.

Removing Your Old Light
To remove your old light you will want to unscrew three small nuts on the ends of the three screw heads inside the cab of your Snugtop Camper or Topper.  Once you remove the nuts, you should be able to remove the light from outside of the vehicle.  We recommend you splice the wiring of the new light into the wiring of your existing light to simplify the installation.  If your old light has a connector, we recommend cutting off the old connector and splicing the connector into the wiring of the new light.  This way you can plug the light in as originally installed.

Specifications:

• 14.27″ Approximate Length (362.5 Millimeters)
• 12.42″ Approximate Length of Bracket (315.6 Millimeters)
• 12.18″ Approximate Length from End Screw to End Screw (309.4 Millimeters)
• 3 Screws (Reverse Thread Mounted)
• Front Mount Design
• Designed for Snugtop Applications
• SAE/DOT Approved (Department of Transportation)