11″ Thin LED Reverse Backup Light

Description

This is a custom LED reverse or backup light that lights up clear or bright white when illuminated.  This light is designed to be mounted with two screws or 3M tape (provided) to a flat surface.   The light has two tabs on either side of the light that come off and allow you to mount the light with screws.  The tabs cover the screws to provide a sleek mounting appearance.  It also has 3M tape on the back of the light for mounting to a flat surface.  You can use either mounting method to mount the light.

The wiring for this light feeds through the back of the light.  You will need to drill a hole to feed the wiring through wherever you intend to mount the light.  This light is very thin and sleek.  This is a great light for a custom application such as an RV, Motorcycle, or custom application.

Specifications

• 11″ Clear Lens (11.02″ x 1.02″ x .35″)
• Lights up Clear
• PMMA High Impacted Clear Lens
• SAE DOT Approved
• 12 volt or 24 volt
• 3M Double Sided Tape Backing